Captiveworks Cw 600s Premium Bin Files

Browse and download the latest hardware and drivers for hardware ID USB VID_1908&PID_2311&REV_0100&MI_00.This device is recognised as USB2.0 PC CAMERA. Usb vid 1908 pid 2311 mi 00.

Posted on Tuesday, November 04, 2008 - 19:22 GMTPlymouth, As I informed you before: Loading the wrong bin file resulted in 0000 on the receiver display and a green TV screen. Both the forwarded factory file and bin file 2.05 were loaded, as advised. The video image consists of colors scattered all over the screen 2.

GoodFTA - We have the latest Captiveworks fta files, CaptiveWorks bin files and Captiveworks codes, join us today and get access to the largest captiveworks forum. Get the support you need for your FTA equipment today with Good FTA! All levels of access on our private board includes fast downloads.

Pressing 'Menu' on the remote control switches the receiver off 3. Pressing 'EPG' produces a PIP screen 4. No list appears on pressing 'FAV' Hope this additional information will assist in finding a solution. Appreciate your support.

Please advise. Regards, Eugene.

Posted on Tuesday, November 04, 2008 - 19:45 GMThey young albert try this it may help.courtesy of crazyfta.net CaptiveWorks CW-600S - Loaded Wrong Bin File Problem - Repair Guide What to do when you accidentally loaded the wrong bin file. CaptiveWorks receivers are very forgiving. Either the CaptiveWorks CW-600S or the CW-600S Premium can fix itself. Just do the following. STOP - Do NOT try to put the correct bin on anymore. Power off the receiver from the rear power switch. Turn on the power ON from the rear AND at the same time hold in the front power button for 5 seconds.

The receiver will display 'BOOT' and it is now in boot mode. That is what we want, and you can let go off the front power button when this is displayed. Now, load the factory bin file. Next, Load the CORRECT new bin file this time. Activate patch. (F1 and 000) 7.

Setup dish antennas and scan channels. There you go, your CaptiveWorks CW-600S receiver is now back up and running!!